| Hangar |
Aircraft |
Category |
Date |
Preview |
| David Duckett | West Wings Spitfire Mk 22/24 | Build | 28-Jul-07 17:19 |  | | Views : 1821 | | 2 coats of dope, 2 coats of white acrylic, 2 of yellow , then mask for the black. |
| David Duckett | West Wings Spitfire Mk 22/24 | Build | 28-Jul-07 17:16 |  | | Views : 1900 | | The back was done with sandpaper wrapped around my finger. The spinner has slots made of balsa and glued to this insert. |
| David Duckett | West Wings Spitfire Mk 22/24 | Build | 28-Jul-07 17:14 |  | | Views : 1719 | | Rough shape with knife, finish with sanding block. Round on top and tapering to the point. |
| David Duckett | West Wings Spitfire Mk 22/24 | Build | 28-Jul-07 17:12 |  | | Views : 2023 | | Prop parts. 2 pieces of 3/32" glued together. Holes in spinner made with a hole pinch. |
| John M Oshust | Scratch Built MiG3 | Build | 27-Jul-07 21:19 |  | | Views : 1089 | | This is turning out to be quite a large "Bird!" |
| John M Oshust | Scratch Built MiG3 | Build | 27-Jul-07 21:07 |  | | Views : 1117 | | The shape of the stabilizers in the Stahl flying model plan is not close enough to the real Mig. The pencil lines indicated where I will amputate, fill and shape the leading edges. The fillets between the fuse and stabilizers are also temps for a look s |
|
| Hangar |
Aircraft |
Category |
Date |
Preview |
| John M Oshust | Scratch Built MiG3 | Build | 27-Jul-07 21:04 |  | | Views : 1183 | | The tail assembly was taped together for a look see. The tail of the submarine was amputated from the fuselage and attached to the rudder as per the real Mig |
| John M Oshust | Scratch Built MiG3 | Build | 26-Jul-07 23:45 |  | | Views : 1159 | | The workers worked a bit of overtime to get the tail completed today. |
| jerry campbell | Dumas Kit #323, B-26 Marauder | Build | 26-Jul-07 23:17 |  | | Views : 7440 | |
| jerry campbell | Dumas Kit #323, B-26 Marauder | Build | 26-Jul-07 23:14 |  | | Views : 7249 | | The instrument panel. I also bought a 1/48 scale Eduard photo etched cockpit for reference, t is excellent, especially the illustrated instructions. |
| jerry campbell | Dumas Kit #323, B-26 Marauder | Build | 26-Jul-07 23:08 |  | | Views : 10952 | | With the papering done it is time to start working on some details. The following are some cdockpit reference photos that I took off the internet as well as some drawings I made from material I could not print out. |
| jerry campbell | Dumas Kit #323, B-26 Marauder | Build | 26-Jul-07 23:00 |  | | Views : 7393 | | The cowlng and airscoops with some sanding fit nicely. After looking closely at the airscoops I decided to paint the intakes black instead of cutting them out. |
|
